- Density: 1GB
- Speed: DDR2 533MHz (PC4300)
- Config: 128M x 8
- Pin: 244 Pin
- Form: MiniDIMM
- Description: Register & PLL w/ECC
FEATURES
• Fast data transfer rates: PC2-3200 or PC2-4200
• Utilizes 400 MT/s and 533 MT/s DDR2 SDRAM components
• VDD = +1.8V ± 0.1V, VDDQ = +1.8V ± 0.1V
• VDDSPD = +1.7V to +3.6V
• JEDEC standard 1.8V I/O (SSTL_18-compatible)
• Differential data strobe (DQS, /DQS) option
• Four-bit prefetch architecture
• Differential clock inputs (CK, /CK)
• Commands entered on each rising CK edge
• DQS edge-aligned with data for READs
• DQS center-aligned with data for WRITEs
• DLL to align DQ and DQS transitions with CK
• Four or eight internal device banks for concurrent operation
• Data mask (DM) for masking write data
• Programmable /CAS latency (CL): 3 and 4
• Posted /CAS additive latency (AL): 0, 1, 2, 3, and 4
• WRITE latency = READ latency - 1 CK
• Programmable burst lengths: 4 or 8
• READ burst interrupt supported by another READ
• WRITE burst interrupt supported by another WRITE
• Adjustable data-output drive strength
• Concurrent auto precharge option is supported
• Auto Refresh (CBR) and Self Refresh Mode
• 7.8125μs maximum average periodic refresh interval
• 64ms, 8,192-cycle refresh
• Off-chip driver (OCD) impedance calibration
• On-die termination (ODT)
• Serial Presence Detect (SPD) with EEPROM
• Gold edge contacts
• PCB : Height (1180mil), double sided component